SPS Primer Finish Gloss is a quick drying SPS (Single Protection System) single coat finish, designed to deliver excellent performance across a wide range of applications.
Developed to provide both priming and finishing properties in one coating, this product offers an efficient solution where durability, appearance, and application speed are essential.
- Fast Drying
- Single coat system for efficient application
- Tough and durable finish
- Excellent performance across a range of substrates
- Suitable for a wide range of industrial applications
All HMG Paints products are manufactured in Manchester, UK under the auspices of an ISO 9001 management system and are Made in Britain accredited.
SPS Primer is suitable for use on properly cleaned, prepared and appropriate primed substrates including mild steel, shot blasted steel, aluminium and galvanised steel when used in conjunction with the relevant HMG preparation systems. Not recommended for application over incompatible or poorly prepared surfaces.
IMPORTANT INFORMATION BEFORE USE:
Read and follow SDS, TDS and label instructions. Stir paint thoroughly before use. Always use the same batch number on the same job. Check colour and sheen, HMG will not accept any discrepancies arising after use.
Where appropriate, filter the product immediately before use. If in any doubt, contact HMG Technical Service Department on 0161 205 7631.
All products are manufactured to a high standard; however, users should ensure suitability for their specific application prior to use.
For more information on this product, please refer to the SPS Primer Finish Gloss Product Guide, which includes a printable PDF datasheet produced by HMG’s technical experts.
PRODUCT FEATURES:
Number of Coats: 1–2 (application dependent)
Recoat Time: 15 minutes between coats
Drying Time: 30 minutes – Touch Dry, 6 hours – Hard Dry (@ 20°C)
Finish: 30,70,Gloss
Indoor or Outdoor Use: Both (subject to specification)
Coverage: 45m² per litre @ 100 microns WFT
Benefits: Quick drying, single coat system, efficient application
UK Delivery – Made to order
All HMG branded products, including base paints as well as colourants, are produced in the UK, with each tin manufactured at HMG’s Manchester-based facility.
